Top Ramen

[pointsnorth]

Transmission mount is finished proper. Tcase is bolted up for the final time. Black box bracket for the shifter is done and mounted


Sent from my iPhone using Tapatalk

[pointsnorth]

We also got Taylor’s canyon front end back together and sitting on four wheels. New spring packs having it sitting much lowered and the body roll should be more manageable


Sent from my iPhone using Tapatalk

[Snowracer]

front tube work looks really good

[Scott Cee AKA 2drx4]

We also got Taylor’s canyon front end back together and sitting on four wheels. New spring packs having it sitting much lowered and the body roll should be more manageable


Sent from my iPhone using Tapatalk

It's a leaf spring SAS in the front?

[pointsnorth]

We also got Taylor’s canyon front end back together and sitting on four wheels. New spring packs having it sitting much lowered and the body roll should be more manageable


Sent from my iPhone using Tapatalk

It's a leaf spring SAS in the front?

yes it is. Toyota axles locked front and rear. used a chevy 63 rear kit from trail gear. Tacoma length draglink

v8 swapped with a all aluminum 5.3 which is actually a lot lighter that the stock motor

[pointsnorth]

Started stripping the front axle for the full hydro mods. I. This picture you can see I’m running the front range kit that flips the knuckles leaving the factory calliper mounts facing forward


Sent from my iPhone using Tapatalk

[pointsnorth]

Front unit bearing comes off with eight bolts once the calliper and rotor are removed


Sent from my iPhone using Tapatalk

[pointsnorth]

Reamed to 1/2 inch


Sent from my iPhone using Tapatalk

[pointsnorth]

Had my oldest son cut some parts for me. His first on the arcdroid


Sent from my iPhone using Tapatalk

[arse_sidewards]

"why is there so much grease behind the ..... oh, that dumbass used Toyota axles"

[pointsnorth]

Factory arms reamed to 3/4 to be ready for a weld in slug


Sent from my iPhone using Tapatalk

[pointsnorth]

Had the local machinist spin me up some inserts


Sent from my iPhone using Tapatalk

[pointsnorth]

Been picking away at the small things. But we got these mocked last with me drinking beer and cutting stuff on the table and jay drinking beer and mocking it up. Me and Brad got a plan for the beadlocks I think lol. Brad would remember he was sipping the Pepsi and on crowd control. As per usual there was a bunch people hanging out while we worked


Sent from my iPhone using Tapatalk

[Snowracer]

so its like 70 days till may long, this going to be done in time?

[pointsnorth]

it might be time to order a locker gears and bigger tires for the shop jalopy lol