I can do better.
Picture of the day thread!
-
Scott Cee AKA 2drx4
- Trail Tamer
- Posts: 2155
- Joined: Mon Sep 16, 2019 10:59 pm
- Location: Prince George, BC
- Has Liked: 158 times
- Been Liked: 53 times
- Contact:
-
Shancerlelby
- Forum Newbie
- Posts: 43
- Joined: Sun Sep 22, 2019 5:36 pm
- Been Liked: 2 times
-
Scott Cee AKA 2drx4
- Trail Tamer
- Posts: 2155
- Joined: Mon Sep 16, 2019 10:59 pm
- Location: Prince George, BC
- Has Liked: 158 times
- Been Liked: 53 times
- Contact:
Re: Picture of the day thread!
Yeah, but it'll clean all the corrosion and crusties off like nothing!
-
Shancerlelby
- Forum Newbie
- Posts: 43
- Joined: Sun Sep 22, 2019 5:36 pm
- Been Liked: 2 times
-
pointsnorth
- Trail Tamer
- Posts: 1466
- Joined: Thu Sep 19, 2019 4:21 pm
- Location: Houston BC
- Has Liked: 43 times
- Been Liked: 48 times
Re: Picture of the day thread!
Hemroid brush?Helidump wrote:sooooo whats the other end for...
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
Shancerlelby
- Forum Newbie
- Posts: 43
- Joined: Sun Sep 22, 2019 5:36 pm
- Been Liked: 2 times
-
Scoobienorth
- Trail Tamer
- Posts: 1062
- Joined: Sun Sep 22, 2019 4:43 pm
- Location: Enderby
- Has Liked: 84 times
- Been Liked: 72 times
Re: Picture of the day thread!
Buddy sent me this picture this morning of his 2010ish 4.7 v8 tundra. Apparently he hit a snow drift and sucked snow into air filter and it ate the lid of the air filter at -35. He stepped on gas and it went bang and quit. He pulled some air box parts out of the throttle body but it ate some of it.
- Attachments
-
-
Scott Cee AKA 2drx4
- Trail Tamer
- Posts: 2155
- Joined: Mon Sep 16, 2019 10:59 pm
- Location: Prince George, BC
- Has Liked: 158 times
- Been Liked: 53 times
- Contact:
Re: Picture of the day thread!
At least it's relatively soft. Might not have really ruined anything internal.Scoobienorth wrote: ↑Sun Jan 12, 2020 7:45 am Buddy sent me this picture this morning of his 2010ish 4.7 v8 tundra. Apparently he hit a snow drift and sucked snow into air filter and it ate the lid of the air filter at -35. He stepped on gas and it went bang and quit. He pulled some air box parts out of the throttle body but it ate some of it.
-
Shancerlelby
- Forum Newbie
- Posts: 43
- Joined: Sun Sep 22, 2019 5:36 pm
- Been Liked: 2 times
-
Shancerlelby
- Forum Newbie
- Posts: 43
- Joined: Sun Sep 22, 2019 5:36 pm
- Been Liked: 2 times
Re: Picture of the day thread!
Fit 35s in my winter beater. No lift. 
Sent from my SM-G870W using Tapatalk
Sent from my SM-G870W using Tapatalk
-
Scott Cee AKA 2drx4
- Trail Tamer
- Posts: 2155
- Joined: Mon Sep 16, 2019 10:59 pm
- Location: Prince George, BC
- Has Liked: 158 times
- Been Liked: 53 times
- Contact:
-
Scott Cee AKA 2drx4
- Trail Tamer
- Posts: 2155
- Joined: Mon Sep 16, 2019 10:59 pm
- Location: Prince George, BC
- Has Liked: 158 times
- Been Liked: 53 times
- Contact:
Re: Picture of the day thread!
Coworker was staying late tonight to change his diff oil because it was starting to make some noise. 
- Attachments
-
-
Scott Cee AKA 2drx4
- Trail Tamer
- Posts: 2155
- Joined: Mon Sep 16, 2019 10:59 pm
- Location: Prince George, BC
- Has Liked: 158 times
- Been Liked: 53 times
- Contact:
Re: Picture of the day thread!
I initially thought pinion bearings went out or pinion nut backed off. But I guess both the carrier bearings are shot and the whole carrier is torquing over into the pinion. Pretty bad, looks like water contamination of the oil started it all.
He ordered a bearing kit and I'd give him a hand but I'm going to another hangar for a bit. He'll figure it out though.