Top Ramen

[pointsnorth]

Chopped the front cab mounts off



Sent from my iPhone using Tapatalk

[HMF]

So time for a cage that fits inside the body?

[Scott Cee AKA 2drx4]

Decided the body is just going to get in the way and just going all tube?

[Mr.gutsy]

Im just here for the noodle frame

[pointsnorth]

Decided the body is just going to get in the way and just going all tube?

originally the plan was to have a tube chassis with a full cab inside all the tube work. but after making room for the engine and still having to fix all the "mods" done prevously the whole fire wall was coming out and there was only going to be less then 4 square feet of floor left

[pointsnorth]

So time for a cage that fits inside the body?

plan now is too build a buggy that the cab can slip over

[Johnny5]

So time for a cage that fits inside the body?

plan now is too build a buggy that the cab can slip over

It’ll be like LEGO. Then ya can have a couple different cabs to click into place depending on the time of year lol

[pointsnorth]

I’ve been super swamped lately at work but ordered up a 30 cal box to house my pcm. Of course they ship me the wrong one it close dimensional just slightly smaller which doesn’t work in my favour


Sent from my iPhone using Tapatalk

[Scott Cee AKA 2drx4]

Princess Auto should have the 30 cal boxes if you're going through PG anytime soon.

[pointsnorth]

I ordered it from princess auto pg this what I was sent


Sent from my iPhone using Tapatalk

[HillBilt]

Winter Challenge 2021

[pointsnorth]

#maplesyrupmafia


Sent from my iPhone using Tapatalk

[pointsnorth]

shop needs to make some money before I start devoting huge amounts of time to it. Ive had the doors closed pretty much since dec 13th. I only worked on prebooked jobs between my bison hunt and Insanity Fab Winter Challenge. Im thinking koh week is when I'll start. Main event Raceday will definitely be wrenchin on my own stuff

[Scott Cee AKA 2drx4]

Well, I can't exactly bust your balls for not getting anything done. We'll await updates.

[bsdevo]

Looks good, any progress?