Lunchbox issues

Chassis, suspension, tires, etc
Post Reply
Scoobienorth
Trail Tamer
Posts: 1045
Joined: Sun Sep 22, 2019 4:43 pm
Location: Enderby
Has Liked: 77 times
Been Liked: 72 times

Lunchbox issues

Post by Scoobienorth »

18C9B779-A02A-457C-8141-F02A7EE3CAB1.jpeg
Should these holes be that ovalled out? I’m pretty sure they were round when I put it in. The oil was full of silver.

Other question is my spider gears won’t go into the carrier with the thrust washers. It’s way too tight. Any tips. Watched Yukon’s video and mine is way tighter than theirs
Top
User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: Lunchbox issues

Post by Snowracer »

no should not be like that, so buy a new one or put that one back in and weld it up into a mini spool
Top
Online
BEEFY
Forum Newbie
Posts: 46
Joined: Sat Sep 21, 2019 4:30 pm
Has Liked: 7 times
Been Liked: 3 times

Re: Lunchbox issues

Post by BEEFY »

Wonder what mine will look like once I get it out. It wasn't happy after the Quesnel beating
Top
arse_sidewards
Forum Addict
Posts: 137
Joined: Mon Apr 06, 2020 11:43 am
Has Liked: 3 times
Been Liked: 18 times

Re: Lunchbox issues

Post by arse_sidewards »

Not being able to install thrust washers is normal in my experience.
Top
User avatar
Scott Cee AKA 2drx4
Trail Tamer
Posts: 2142
Joined: Mon Sep 16, 2019 10:59 pm
Location: Prince George, BC
Has Liked: 157 times
Been Liked: 52 times
Contact:
Contact Scott Cee AKA 2drx4

Re: Lunchbox issues

Post by Scott Cee AKA 2drx4 »

Yeah, weld it.

Worst case scenario it's still broken.
Top
Post Reply

Return to “General Tech”