How to build and kill a trail truck

Document your builds and projects here
User avatar
Scott Cee AKA 2drx4
Trail Tamer
Posts: 2138
Joined: Mon Sep 16, 2019 10:59 pm
Location: Prince George, BC
Has Liked: 157 times
Been Liked: 52 times
Contact:

Re: How to build and kill a trail truck

Post by Scott Cee AKA 2drx4 »

Oh yeah, I forgot about the steering ramifications for you losing a belt. :rasta:

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

truck was running like ass at the race, could hear an exhaust leak but thought it was just the small crack i had found in my one header. so i ordered new headers, same ching chong ones i was running. turns out my leak was little more then just a header crack, found a big nasty one on my exhaust pipe right after the header flange. figured it would be an easy fix of put new headers on and weld a new flange part on and be good. well turns out the ching chong headers where a little off from the olds ones, about inch and half off so had to re work the Y pipe

Image

with the crack fixed, new headers and gaskets truck ran best it ever has. went wheeling and no more stalling, running rich or backfires so really happy with it now.

Image

Image

Image
Last edited by Snowracer on Mon Aug 10, 2020 4:58 pm, edited 1 time in total.

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

been trying out the hole outdoorsy thing with the camper and been enjoying that

Image

Image

Image

Johnny5
Actually Wheels
Posts: 362
Joined: Sat Oct 05, 2019 11:15 pm
Location: Pg
Has Liked: 14 times
Been Liked: 8 times

Re: How to build and kill a trail truck

Post by Johnny5 »

Decent bud good news all around then.
Inch and a half off eh? Haha they dont even try to replicate the previous ones eh

User avatar
HillBilt
Actually Wheels
Posts: 623
Joined: Fri Sep 20, 2019 3:25 pm
Has Liked: 13 times
Been Liked: 21 times

Re: How to build and kill a trail truck

Post by HillBilt »

Johnny5 wrote: Mon Aug 10, 2020 7:45 pm Inch and a half off eh? Haha they dont even try to replicate the previous ones eh
Yeah, tell them damn kids to get a decent measuring tape!

Camping trip looked good :smokin:
Building Junk-Wheeling Junk-Breaking Junk

Mr.gutsy
Forum Addict
Posts: 199
Joined: Wed Oct 16, 2019 1:01 am
Been Liked: 3 times

Re: How to build and kill a trail truck

Post by Mr.gutsy »

HillBilt wrote: Mon Aug 10, 2020 7:49 pm
Johnny5 wrote: Mon Aug 10, 2020 7:45 pm Inch and a half off eh? Haha they dont even try to replicate the previous ones eh
Yeah, tell them damn kids to get a decent measuring tape!

Camping trip looked good :smokin:
I hear chinese "inches" are shorter than north american inches. :flipoff:

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

finally got around to fixing my steering. when i busted it at Insanity Fab i bought a new joint off another racer and fixed it there so i could get it back on the trailer then just never did anything after that. so pretty sure the drivers tire was pointing off as never aligned it or anything and been wheeling and racing it like that

went with EMF ball sockets and 7/8 joints so should not have any more failures and if i do it will be the ram or knuckle now

Image

User avatar
HillBilt
Actually Wheels
Posts: 623
Joined: Fri Sep 20, 2019 3:25 pm
Has Liked: 13 times
Been Liked: 21 times

Re: How to build and kill a trail truck

Post by HillBilt »

EMF ball sockets bring the pimp :pimp:
Building Junk-Wheeling Junk-Breaking Junk

User avatar
Scott Cee AKA 2drx4
Trail Tamer
Posts: 2138
Joined: Mon Sep 16, 2019 10:59 pm
Location: Prince George, BC
Has Liked: 157 times
Been Liked: 52 times
Contact:

Re: How to build and kill a trail truck

Post by Scott Cee AKA 2drx4 »

Countdown until the knuckle lets go. :flipoff:

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

HillBilt wrote: Mon Sep 21, 2020 10:44 am EMF ball sockets bring the pimp :pimp:
nicest thing about the truck now :pimp:
Scott Cee AKA 2drx4 wrote: Mon Sep 21, 2020 5:47 pm Countdown until the knuckle lets go. :flipoff:
this weekend probably :devil:

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

lame update but its been a while

went and raced and brought the suck, truck had exhaust leak issues again, and blew the upper rad hose off

Image

my attempt to fix it at the race with some muffler repair tape, pop can and hose clamps failed

Image

patched the exhaust back together and a few other things and went night snow wheeling

Image

Image

almost rolled it into a waste deep frozen water crossing, to keep from going over i had the Welfare put his front bumper into my door and used him as a pivot point

Image

door is mint

Image

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

went to go and start the pos the other weekend and was just getting the old click click click. so put the battery charger on it and cleaned all my connections and still would not start, even tried and nothing. was seeing that as soon as i went to key power i would drop down to 9.5volts and that not even turning my efi or ignition on. bypassed my batteries and was still having same issue so did some more testing and talking the the mexican mechanic and found out my alternator was drawing as soon as i went key power. bypassed the alternator and was still on jumpers and would still not start, starter was drawing so much power it would not turn the truck over. so as on right now it needs an alternator, starter and from a few test ive done 2 new yellow tops :headbang:

Johnny5
Actually Wheels
Posts: 362
Joined: Sat Oct 05, 2019 11:15 pm
Location: Pg
Has Liked: 14 times
Been Liked: 8 times

Re: How to build and kill a trail truck

Post by Johnny5 »

When ur testing for power and are curious of amps its a good idea to use the old test light rather than multi meter i find. A shitty conection can still give you 12 volts but practically zero amps.
Thats my tech tip and hope it helps lol.

Johnny5
Actually Wheels
Posts: 362
Joined: Sat Oct 05, 2019 11:15 pm
Location: Pg
Has Liked: 14 times
Been Liked: 8 times

Re: How to build and kill a trail truck

Post by Johnny5 »

And also before i left you guys the other night you damn near slide into the drink haha. Couple scary encounters for sure

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

Johnny5 wrote: Wed Dec 02, 2020 7:47 pm And also before i left you guys the other night you damn near slide into the drink haha. Couple scary encounters for sure
that time wasnt even that bad :homer: stupid cut boggers suck at the side traction so gets sideways pretty fast on the ice

Post Reply