How to build and kill a trail truck

Document your builds and projects here
User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

How to build and kill a trail truck

Post by Snowracer »

figured id add a quick build thread for my pos rig

started as a $400 shit box that turned into a pretty good trail rig. then i got little crazy like normal and wanted to try racing it and well its pretty smashed up and not much longer for the world as have already started on its replacement :popcorn:

Image

after a little cutting and welding it was a pretty cool truck that i actually liked and was built pretty cheap

Image

Image

found out that $400 truck are not ment to last and the motor gave up the battle and this is where i got crazy. got rid of the small block and did a 429 efi swap but also cut the frame off and built a new one

Image

Image
Last edited by Snowracer on Tue Feb 11, 2020 11:31 am, edited 1 time in total.

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

doing more trial truck stuff and starting to show its body damage

Image

Image

Image

around this time it started to get the go fast parts and was beating on it harder and looking to start racing it

3" bypasses and deaver springs

Image

3" coil overs

Image

Image

then this happened

Image

User avatar
Scott Cee AKA 2drx4
Trail Tamer
Posts: 2138
Joined: Mon Sep 16, 2019 10:59 pm
Location: Prince George, BC
Has Liked: 157 times
Been Liked: 52 times
Contact:

Re: How to build and kill a trail truck

Post by Scott Cee AKA 2drx4 »

:smokin:

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

little ruff after the flop

Image

but the weekend after it was back to racing and took even more of a beating

Image

Image

Image

got some race shoes and new body panels

Image

back to trail riding

Image

Image

but new body panels did not like my blind ass driving

Image

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

was time for a cage and little less sheet metal

Image

Image

Image

Image

was race time again, this time at Insanity Fab Winter Challenge. i brought the suck and was was out pretty quick

Image

Image

clipped a tree and busted a steering joint and was done

Image

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

so that pretty much brings the truck up to date as its still sitting on the trailer broken and waiting on some love. but like i said ive already started on the replacement for the truck as have a buggy chassis sitting in the shop waiting to be built. even with that im not quite ready to kill the truck as feel like it has a few more beat downs left in its life so will update this as i go and then start a new build for the buggy

Scoobienorth
Trail Tamer
Posts: 1044
Joined: Sun Sep 22, 2019 4:43 pm
Location: Enderby
Has Liked: 77 times
Been Liked: 72 times

Re: How to build and kill a trail truck

Post by Scoobienorth »

Hopefully you get it rolling and keep it rolling along as the other gets built. I’m finding my minivan keeps slowly draining resources from my next build though. Now there isn’t much left

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

Scoobienorth wrote: Tue Feb 11, 2020 10:49 am Hopefully you get it rolling and keep it rolling along as the other gets built. I’m finding my minivan keeps slowly draining resources from my next build though. Now there isn’t much left
I have enough parts to get the buggy about 50% done before i have to start robbing the good parts off the truck. so with that and just doing life stuff the truck will get a few more trial rides out of it before its time

User avatar
HillBilt
Actually Wheels
Posts: 623
Joined: Fri Sep 20, 2019 3:25 pm
Has Liked: 13 times
Been Liked: 21 times

Re: How to build and kill a trail truck

Post by HillBilt »

I really like the current state the truck is in right now. I wasnt sure about the no front sheet metal but its grown on me and I like it :pimp:
Building Junk-Wheeling Junk-Breaking Junk

User avatar
pointsnorth
Trail Tamer
Posts: 1451
Joined: Thu Sep 19, 2019 4:21 pm
Location: Houston BC
Has Liked: 43 times
Been Liked: 43 times

Re: How to build and kill a trail truck

Post by pointsnorth »

going to keep it alive for the summer?

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

HillBilt wrote: Tue Feb 11, 2020 12:30 pm I really like the current state the truck is in right now. I wasnt sure about the no front sheet metal but its grown on me and I like it :pimp:
dont mind the current state but hate the no fender look :homer:
pointsnorth wrote: Tue Feb 11, 2020 12:42 pm going to keep it alive for the summer?
probably. im on the fence about taking the truck out and wheeling it more or pulling it apart and getting the buggy done as fast as i can

User avatar
Scott Cee AKA 2drx4
Trail Tamer
Posts: 2138
Joined: Mon Sep 16, 2019 10:59 pm
Location: Prince George, BC
Has Liked: 157 times
Been Liked: 52 times
Contact:

Re: How to build and kill a trail truck

Post by Scott Cee AKA 2drx4 »

Snowracer wrote: Tue Feb 11, 2020 1:00 pm probably. im on the fence about taking the truck out and wheeling it more or pulling it apart and getting the buggy done as fast as i can
Careful not to just repeat what happened last time. Dismantle wheeler, start buggy, realize it will take too long, buy cheap truck and proceed to pour everything into it. :homer:

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

figured it was time to fix the truck after insanity fab, turns out i did little more damage then i thought. soon as i started to take the brake caliper off i felt the knuckle move, so pulled the knuckle off and seen that i blew the lower bearing and beat the inner C to shit. was pretty set on cutting the C off and replacing it as the damage was bad enough that it messed up where the bearing presses in. after sleeping on it i figured id try and fix it as cant really make it worse trying. as of right now i think i got it so that i can get a bearing race back in and have welded the C back up, wont really know till the new parts show up and can try putting it back together
IMG_20200222_154729_1.jpg
IMG_20200222_154922.jpg
IMG_20200222_161309.jpg
IMG_20200223_154940.jpg

User avatar
pointsnorth
Trail Tamer
Posts: 1451
Joined: Thu Sep 19, 2019 4:21 pm
Location: Houston BC
Has Liked: 43 times
Been Liked: 43 times

Re: How to build and kill a trail truck

Post by pointsnorth »

You going to be ready to race this weekend


Sent from my iPhone using Tapatalk

User avatar
Snowracer
Actually Wheels
Posts: 667
Joined: Fri Sep 20, 2019 10:24 am
Has Liked: 5 times
Been Liked: 91 times

Re: How to build and kill a trail truck

Post by Snowracer »

pointsnorth wrote: Tue Feb 25, 2020 7:17 pm You going to be ready to race this weekend


Sent from my iPhone using Tapatalk
negative, wont have the parts to fix it in time

Post Reply