Smittybuilt 2781 mod

Gear, Equipment, Towing, Trailers, etc - Basically anything that's not actually the 4x4 but is necessary to go 4x4ing
Post Reply
Scoobienorth
Trail Tamer
Posts: 1044
Joined: Sun Sep 22, 2019 4:43 pm
Location: Enderby
Has Liked: 77 times
Been Liked: 72 times

Smittybuilt 2781 mod

Post by Scoobienorth »

Well I modified the chuck and as the smittybuilt end won’t go over my J-flators which is why I originally put dual valve stems in my steel wheels. My aluminum wheels I don’t want to go that route. So I pulled the guts out of a clip on tire end as to not dead head the compressor. Since then I started freezing up on the smittybuilt gauge/bleed down. Now it’s12.5 feet of 5/16 transmission line right to the valve stem. The compressor was always faster without the curly hose. It’s dumb easy to take apart. It’s just a spring over a barn fitting. Pull the spring back and it slides apart. Should air up pretty fast especially as the J-flator flows more air than the standard valve stem as well.
0FC3BE6F-BD43-4556-AAB5-26CD5DB0DB46.jpeg
6DB88121-BFA3-4921-8B5F-FADBA744542D.jpeg
Top
User avatar
Scott Cee AKA 2drx4
Trail Tamer
Posts: 2137
Joined: Mon Sep 16, 2019 10:59 pm
Location: Prince George, BC
Has Liked: 157 times
Been Liked: 52 times
Contact:
Contact Scott Cee AKA 2drx4

Re: Smittybuilt 2781 mod

Post by Scott Cee AKA 2drx4 »

Makes sense to do it that way.
Top
Scoobienorth
Trail Tamer
Posts: 1044
Joined: Sun Sep 22, 2019 4:43 pm
Location: Enderby
Has Liked: 77 times
Been Liked: 72 times

Re: Smittybuilt 2781 mod

Post by Scoobienorth »

F6BE930F-A080-4F36-B7CE-58A456F87489.jpeg
Never clocked how long it took before but it’s noticeably quicker. Steves 35” tires on 16” rims took 2 mins 10 seconds from 2-20 psi. The hose is a lot less of a fight to. Definitely a good mod for these compressors. Run cooler to.
Top
Post Reply

Return to “Gear and Equipment”