89 FJ62 family wheeler

[Shancerlelby]

The 62 front clip has grown on me of course if somebody could hook me up with a 60s front clip



Sent from my iPhone using Tapatalk

Come buy this other bj60. Same price as the last one. It's dying of neglect here


Sent from my SM-G870W using Tapatalk

[pointsnorth]

The 62 front clip has grown on me of course if somebody could hook me up with a 60s front clip



Sent from my iPhone using Tapatalk

Come buy this other bj60. Same price as the last one. It's dying of neglect here


Sent from my SM-G870W using Tapatalk

Is the motor half decent is it a Manuel shift tcase


Sent from my iPhone using Tapatalk

[Scoobienorth]

Just use an xj front clip

Might well swap a dana35 in too lol


Sent from my iPhone using Tapatalk

I heard they’ll hold 37’s and have good ground clearance.

[Shancerlelby]

Runs good. Unlike the last one with the cracked head. I think it's push button 4wd like the last. Low range on the floor though.

Sent from my SM-G870W using Tapatalk

[Scott Cee AKA 2drx4]

Just use an xj front clip

Might well swap a dana35 in too lol


Sent from my iPhone using Tapatalk

I heard they’ll hold 37’s and have good ground clearance.

With typical Toyota power it probably will.

[pointsnorth]

Actually this model of landcruiser made more hp and way more torque then the same model year Chevy sb truck.


Sent from my iPhone using Tapatalk

[pointsnorth]

so after putting the charger on this thing for the third time this year with the intent of actually working on it when I had a minute, I had a no show this morning at work so this happened.

[pointsnorth]

only been sitting for how many years and it took me 2.5 hours and two coffees. lol

[Scott Cee AKA 2drx4]

Sometimes you just have to actually do something... or it never gets done.

[pointsnorth]

Wheeled it out of the shop. Still need the rear finished might end up cutting the old perches off and putting new ones as the old ones are in roughy shape. Has a bit of a stink bug stance but once I mount a bumper with tire carrier and Jerry can holder it should level out.


Sent from my iPhone using Tapatalk

[Johnny5]

Hopefully when ya ad weight itll level out a little. That shackle angle looks like my toyota which offers very poor ride/flex

[pointsnorth]

Hopefully when ya ad weight itll level out a little. That shackle angle looks like my toyota which offers very poor ride/flex

these are the medium duty springs from ome which are actually designed to carry a decent amount of wieght which is good as i have a fair amount of gear that will be packed in there at all times. having two sons generally means three of everything fishing rods, axes, gold pans, etc. I scored an old military looking trunk that will live back there for gear. then there is my chuck box that will most likely live there for the most part as well. Plan is for a bumper with a tire swing out as well as room for jerry cans and a chain saw. not sure if im going with the factory roof rack or go with a custom unit

[pointsnorth]

Three broken leafs out of four


Sent from my iPhone using Tapatalk

[Scott Cee AKA 2drx4]

God damn leaf springs always doing that.

[Johnny5]

Got ur use outta them