Steve finally tore down his sway bar controller. Deleted the motor with a block off plate and drilled the shift fork to accept a cable and lock screw. No more locking up and issues with it staying locked or not sure if it actually unlocks. Now it’s cable by the 4wd shift lever so he doesn’t need to get out to unlock it.
Rubicon sway bar mod
-
Scoobienorth
- Trail Tamer
- Posts: 1045
- Joined: Sun Sep 22, 2019 4:43 pm
- Location: Enderby
- Has Liked: 77 times
- Been Liked: 72 times
Rubicon sway bar mod
First pic is the cable drilled through the shift fork as well as a set screw drilled and tapped in.
Second shows the side of the housing he drilled through and the side case of the housing and shift fork.
Third is the sheetmetal block off plate me and my daughter made fit where the motor and electronics went.
Little video roughly showing what the half of the case moves to engage the sway bar. https://www.instagram.com/p/B9Qgb3dnszc ... 8ukbiq9t13
Steve finally tore down his sway bar controller. Deleted the motor with a block off plate and drilled the shift fork to accept a cable and lock screw. No more locking up and issues with it staying locked or not sure if it actually unlocks. Now it’s cable by the 4wd shift lever so he doesn’t need to get out to unlock it.
Steve finally tore down his sway bar controller. Deleted the motor with a block off plate and drilled the shift fork to accept a cable and lock screw. No more locking up and issues with it staying locked or not sure if it actually unlocks. Now it’s cable by the 4wd shift lever so he doesn’t need to get out to unlock it.
-
pointsnorth
- Trail Tamer
- Posts: 1451
- Joined: Thu Sep 19, 2019 4:21 pm
- Location: Houston BC
- Has Liked: 43 times
- Been Liked: 43 times
-
Scott Cee AKA 2drx4
- Trail Tamer
- Posts: 2142
- Joined: Mon Sep 16, 2019 10:59 pm
- Location: Prince George, BC
- Has Liked: 157 times
- Been Liked: 52 times
- Contact:
Re: Rubicon sway bar mod
Great idea. I might have to look for a screwed one for my MJ, it would be pretty cool...