Top Ramen

[pointsnorth]

yeah I am, with the cab all slice and diced it offers no support on even a flop. I'm going a little over board then a standard internal cage, but my boys will definitely ride with me in it so I will take the extra step

Ive got a removable door bar idea in mind as well

[Provience]

yeah I am, with the cab all slice and diced it offers no support on even a flop. I'm going a little over board then a standard internal cage, but my boys will definitely ride with me in it so I will take the extra step

Ive got a removable door bar idea in mind as well

bolt on removeable style or quick latch style for regular use?

i hate straight across door bars, but they do work and are safe so i'm looking forward to seeing what you come up with

[pointsnorth]

Thinking a milled down slug that slides in this tube then a piece of 1 3/4 tube at a 45 down to the base of the a-pillar


Sent from my iPhone using Tapatalk

[pointsnorth]

Of course if it takes a good hit it won’t be coming out but then it’s done it’s job too


Sent from my iPhone using Tapatalk

[pointsnorth]

some reading turned up that Chevy inner tie rods are the same thread as the psc ram I’m using


Sent from my iPhone using Tapatalk

[Scott Cee AKA 2drx4]

Well that's handy. Hmm.

[pointsnorth]

At the same time the emf small ball socket is cheaper then what these things retail for


Sent from my iPhone using Tapatalk

[arse_sidewards]

some reading turned up that Chevy inner tie rods are the same thread as the psc ram I’m using

That's like having 6ga wire on a 30A breaker.

[pointsnorth]

Lol I know I tried to find beefier ones. The rod is just over half an inch by the boot but reduces from there. emf ball sockets in medium that I’d use are 3/4 and threaded. I can then go 1 1/2 .25 wall and 3/4 hiems on the ends


Sent from my iPhone using Tapatalk

[arse_sidewards]

My 3000lb Subaru has inner tie rods that are M12 threaded at their narrowest point.

[pointsnorth]

yeah how this stuff survives under a diesel truck especially a boat anchor like the duramax allision combo

[pointsnorth]

for 50 bucks more I ordered the emf ballsockets

also got their rebuildable hiems

[Snowracer]

for 50 bucks more I ordered the emf ballsockets

also got their rebuildable hiems

way better idea then that spaghetti steering crap you posted above

you will love the ball sockets

[pointsnorth]

i was ordering the ball sockets on emf website and it stated that what i was ordering is the ball socket that is used for the gm upgraded inner tie rod. I had too see if that was true. napa here just loves me returning opened stuff all the time lol

I really like that everything is rebuildable

[Scott Cee AKA 2drx4]

yeah how this stuff survives under a diesel truck especially a boat anchor like the duramax allision combo

Well it doesn't really.