Picture of the day thread!

[Scoobienorth]

Apparently that pic was too much. Taken down on ask the groups by morning and I got a warning as well from one group. The Jeep gladiator group which doesn’t surprise me.

[arse_sidewards]

You ever go to troll someone and then it succeeds beyond your wildest dreams and you kinda feel bad like you just picked on a retard?

[Scoobienorth]

You ever go to troll someone and then it succeeds beyond your wildest dreams and you kinda feel bad like you just picked on a retard?

Honestly it’s almost every time I say something on the gladiator forums. Most of the time I’m not trying though.

[Scott Cee AKA 2drx4]

Apparently that pic was too much. Taken down on ask the groups by morning and I got a warning as well from one group. The Jeep gladiator group which doesn’t surprise me.

I saw the post and just scrolled past, then went to look for it after I realized it was you. No dice finding it again.

[Scoobienorth]

This is in Williston Lake. 6.0 havestroke king ranch completely f’d i think. Water only waist deep so it’s got to be bogged right in. No story. Lots of people on the beach so I called it into police. Curious if the tow company can recover it. It’ll be a hard pull. Soft sand getting out to it so it’ll be interesting. Buddy here in town has a bed truck that could probably do it easy with with 20 psi in the tires but not sure if a tow truck would being as heavy as they are

[Scott Cee AKA 2drx4]

That's nifty. I wonder how they got that far out.

[Scoobienorth]

Our new RAD impact gun at work. The lowest torque setting is 750 ft/lbs and top end is something like 7500-8500 ft/lbs.

1.50” drive

[arse_sidewards]

e lowest torque setting is 750 ft/lbs and top end is something like 7500-8500 ft/lbs.

Soooo, mediocre consumer 1/2 impact gun with an 8:1 adapter on the front.

[Scott Cee AKA 2drx4]

That's pretty sweet. But it does look like a mid tier impact with a multiplier. I wonder how it will hold up.

[Scoobienorth]

Not sure. We don’t use it much, just when we need it, there’s not much else we can use. And we got some big stuff. Apparently it’s got the power to shear off a 2” bolt though